HOURS
MON – FRI: 8am to 5pm
Saturday / Sunday: Closed
Installation, Service & Repair you can Trust
Homeowners in Buncombe, Haywood, Jackson, Swain, Madison, and Henderson counties have trusted WNC Chimney Solutions since 2017 for installation of, and comprehensive service and repair to, their chimneys, fireplaces, and stoves. When you need chimney repair in Highlands, NC you can trust, give our experts a call!
Our Services Include:
- Sale and installation of wood and gas-burning fireplaces and stoves.
- Camera inspections and sweeping of venting systems, following high standards set by the Chimney Safety Institute of America.
- Service to all forms of wood and gas-burning fireplaces and stoves.
- Repairs of masonry and factory-built chimneys, from minor fixes to complete chimney rebuilds.
- Relining masonry chimneys by removal of existing damaged flue and installation of a lifetime-warranted stainless steel insulated liner.
- Fixing leaking chimneys, including repairs of missing, damaged mortar joints; sealing the crown, masonry, and the flashing; and installing a full coverage chimney cap.
Inspections & Chimney Sweeps
We really do care that you have a perfect functioning fireplace and chimney!
Which is why it’s our policy that if any deficiencies are found we don’t sweep, but rather talk about what repairs are needed to bring the system up to code and make it safe to use. Learn more about our inspection and chimney sweeping services below and contact us to schedule your appointment today!
Camera Inspections
We confirm whether or not the chimney and flue is constructed in the proper manner and free from deficiencies which can lead to chimney fires and carbon monoxide leaks.
We inspect for issues including but not limited to the following:
- Cracks and missing mortar that can lead to water intrusion
- Any broken or damaged flue tiles
- The condition of the flashing
- Clearance to combustible issues from basement to attic
- Any area that may be of a safety concern
We’ll fill out a custom inspection report with pictures of your fireplace and chimney to show you your current conditions before reviewing what your goals and options are.
Chimney Sweeps
All of our sweeps are preceded by a full inspection to ensure the system is safe and up to code.
Our inspection process starts on the roof and is a full overview of the system from top to bottom and interior to exterior. We inspect all masonry components of the chimney including mortar joints, flashing, brick/stonework and crown and wash condition.
For those chimneys that are inside a wooden chase, we inspect for signs of water damage, sun rot, and the presence of pests such as carpenter bees.
When we inspect the flue, we use a state-of-the-art camera system. We look for gaps and/or breaks in the tile for masonry and for factory-built systems we are looking for damage to the seams/joint as well as signs of a chimney fire.
Services FAQ
If you have questions or aren’t exactly sure what you need. No worries! Check out our FAQs below, or give us a call at (828)-400-6253 and we’ll help point you in the right direction!
Why do I need an inspection?
At the end of the day, you are putting a fire in your living room – and we want to make sure you are doing it safely. There are many hidden dangers associated with chimneys and fireplaces, and we not only pride ourselves on mitigating these dangers, but also educating the homeowner about them.
What is the cost of sweep and inspection?
Our Sweep with Inspection prices are dependent on several things such as type of service, location of home, and time of year.
What does an inspection entail?
Our inspections start on the roof and include a full overview of your system. We check the chimney and its cap for integrity and waterproofing, the flue and its condition regarding breaks and cleanliness, and the firebox or appliance and its condition. We follow all codes and standards found in the National Fire Protection Association (NFPA) 211 documentation.
Can you still sweep, even if the inspection finds something wrong?
No. It is our policy that if any deficiencies are found we don’t sweep but rather talk about what repairs are needed to bring the system up to code and make it safe to use.
Cleaning the system gives the impression that you can get away with another burn and that’s just not the case. In the event that a fire was to occur, and we were the last ones to touch it, we would be liable. Upon the completion of our inspection our technicians will sit down with you and review their findings on a tablet where you can see pictures and ask any questions you may have. This report will also be emailed for your records.
After this time they will talk about repairs necessary and what YOU want to achieve with your system.
How long does a sweep and inspection take?
We need around 2 hours per system to perform a proper inspection and report those findings to you. We also will provide you with information about a solution for any issues we find at that time.
What services do you provide?
We are a full service hearth sales, installations, and service company. We do it all, including turn key projects.
How far are you booked out?
We stay booked out around 3 months during the fall. The best time for us to perform services is during the spring and summer. We are often only scheduled out around 2 or 3 weeks during that time of year.
What areas do you service?
We serve all of Western North Carolina, including these counties:
- Haywood
- Buncombe
- Henderson
- Jackson
- Swain
- Madison
- Transylvania
- Macon
We do have an additional service fee if we have to travel over 60 miles to your home from our office in Waynesville, NC.
Don’t see what you need? Just ask.
Need a masonry fireplace repaired? We can do that. Want to buy and have us install a new wood stove? We can help you. Ready to remove and replace an older wood or gas-burning system with something newer? We can do that, too. Everything from wood stove repair to a routine chimney sweep is within our scope, so give us a call today!
We take pride in being able to do almost any job in our field!